- The Control window is your gateway to all of the functionality of the ViewComm System.
- Choose I/O and data link parameters
- Choose Hardware (ports, enable/disable control signal interrupts, enable/disable UART FIFOs,
- choose cabling configuration. See our illustrated Cable Guide (view PDF) for configurations and their capabilities.
- On Viewer or Async Plus, choose to spy on the port or use the unique "Source DTE, no Cables" mode (interact with ongoing communications software running!)
- Choose System Settings: Timestamp options, capture buffer and file max sizes, and much, much more!
- Choose code set
- Choose Protocol Stack - You can choose the protocols actually used - or let VCS choose for you!
- Async PPP
- SLIP
- Custom (set up a stack based on what you actually want to see - then name and save it!
- With Async PPP Here's what you get when you elect to have the additional layers automatically determined:
- Async PPP
- Context Missing
- Data
- DNS
- HTTP
- ICMP
- IP
- Padding
- PPP
- TCP
- UDP
- VJC - (Van Jacobson Compressed TCP/IP)
- VJU
- BUT that's not all! With Greenleaf Software's Greenleaf ViewComm ProtocolWorks, you will
be able to modify existing protocol decodes (you get a language manual with lots of examples
plus a program that lets you interactively write, edit, and test) any protocol you wish!
- Choose Timestamping options (in live mode, while capturing / viewing) from 1.6 seconds to just 100 nanoseconds!
- If you enable timestamping, each byte sent or received, each event in fact, is tagged with an accurate timestamp
- Open windows - Event, Frame, Statistics, Transmit, Signals, Breakout Box
- Get Help
- Open existing capture files or create a new one for session, start / pause / stop capturing.
- View overall configuration and capture progress
|
